Page 6 — English
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
Safety Alert Symbol Indicates a potential personal injury hazard.
Read the Operator’s
Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Wear Eye and Head
Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
head protection.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Gloves
Wear non-slip, heavy-duty protective gloves when
handling the pole saw and the blade.
Safety Footwear
Wear non-slip safety footwear when using this
equipment.
Keep Tool Away from Electri-
cal Lines/Keep Bystanders
Away
DANGER! Risk of electrocution! Keep tool 50 feet
away from electrical lines. Keep all bystanders at
least 50 ft. away.
Electric Shock
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
No Hands Symbol
Failure to keep your hands away from the blade will
result in serious personal injury.
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
hrs Hours Time
n
o
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute
Revolutions, strokes, surface speed, orbits etc.,
per minute
SYMBOLS
To Next Page
Loading...
Need help?
General
