H1 Series
5.5 Battery Connection
Approved compatible battery list
H1 series inverter is only compatible with the batteries listed above, any
other unapproved battery connections will NOT be covered by SAJ limited
warranty.
Note*: H1 series inverter supports lead-acid battery connections and is able
to perform good results with lead-acid battery. However, lithium battery is
preferred as it is capable of direct communication to the charging devices.
SAJ shall not be responsible for the battery safety and performance or
services provided by battery supplier.
Caution：For safety operation and regulation compliance, it is requested to
install a breaker (≥125A) between battery and inverter.
Note: 1* If lithium battery is connected, it is not required to install a breaker
between battery and inverter.
Cable Cross-sectional area（mm²）
Table5.4 Recommended Specifications of DC Cables
Noted: For multiple batteries connection, please refer to B1-5.1-48 battery manual.
To Next Page
Loading...
Need help?
General
