SAJ R5-3K-T2 User Manual

R5 Series
- 2 -
Content
PREFACE ............................................ - 1 -
CHAPTER 1 SAFETY PRECAUTIONS ................... - 4 -
1.1 SCOPE OF APPLICATION .................................... - 4 -
1.2 SAFETY INSTRUCTIONS ..................................... - 4 -
1.3 TARGET GROUP ........................................... - 4 -
CHAPTER 2 PREPARATION ........................... - 5 -
2.1 SAFETY INSTRUCTIONS ..................................... - 5 -
2.2 EXPLANATIONS OF SYMBOLS ................................ - 7 -
CHAPTER 3 PRODUCT INFORMATION................. - 8 -
3.1 APPLICATION SCOPE OF PRODUCTS ........................... - 8 -
3.2 SPECIFICATION FOR PRODUCT MODEL ........................ - 9 -
3.3 OVERVIEW OF PRODUCTS ................................... - 9 -
3.4 DATASHEET ............................................. - 11 -
CHAPTER 4 INSTRUCTIONS FOR INSTALLATION ..... - 18 -
4.1 SAFETY INSTRUCTIONS .................................... - 18 -
4.2 PRE-INSTALLATION CHECK ................................ - 18 -
4.3 THE DETERMINATION OF THE INSTALLATION METHOD AND POSITION - 19
-
4.4 MOUNTING PROCEDURE ................................... - 20 -
CHAPTER 5 ELECTRICAL CONNECTION ............. - 26 -
5.1 SAFETY INSTRUCTION FOR HOT-LINE JOB .................... - 26 -
5.2 SPECIFICATIONS FOR ELECTRICAL INTERFACE ................ - 27 -

SAJ R5-3K-T2 Specifications

General

Start Voltage	150 V
Number of MPPTs	2
Max. Input Current per MPPT	12.5 A
Rated AC Power	3000 W
Max. AC Power	3300 W
Rated AC Voltage	230 V
Rated Grid Frequency	50 Hz / 60 Hz
THDi	<3%
European Efficiency	97.0%
DC Switch	Yes
Protection Degree	IP65
Cooling Method	Natural Convection
AC Voltage Range	180 V - 276 V
Power Factor	0.8 leading...0.8 lagging
Operating Temperature Range	-25°C to +60°C
Communication	RS485, Wi-Fi
Humidity	0% - 100%
Max. DC Power	4500 W