SAJ R6-10K-S2-X User Manual

R6 Series Solar Inverter
15
16
4.2.2 Scope of Delivery
Please contact after sales if there is missing or damaged components.
Inverter*1
Wall mounting bracket*1
Documents
Communication module*1
（Optional）
Screw & expansion bolt &
washer*3
M5*12 screw*1
AC connector set*1
PV connector
R6-5-10K-S3*6
R6-5-10K-S2-X*4
The documents include the user manual, quick installation guide and packaging list.
4.3 Installation Method and Position
4.3.1 Installation Position and Clearance
DO NOT expose the inverter to direct solar irradiation as this could cause power derating due to overheating.
The ambient temperature should be between -40 °C～+60°C (-40° F～140° F) to ensure optimum operation.
Choose locations with sufficient air exchange. Ensure additional ventilation, when necessary.
DO NOT install the inverter near any inflammable and explosive items.
To make sure the installation spot is suitably ventilated, if multiple SAJ on-grid solar inverters are installed at
the same area, the safety clearance should be followed for proper ventilation conditions.
Figure 4.1
Installation clearance
4.3.2 Mounting Method
Figure 4.2
Mounting method
① The equipment employs natural convection cooling, and it can be installed indoor or outdoor.
② Mount vertically or tilted backwards by max. 15°. Never install the inverter tilted forwards, sideways,
30CM 50CM
30CM
50CM
30CM
Keep away from sunlight Keep dry Keep it clear of snow Sun Rain
Accmulated snow
15°

SAJ R6-10K-S2-X Specifications

General

Brand	SAJ
Model	R6-10K-S2-X
Category	Inverter
Language	English