Press the ā¼ā² buttons to select īīī īøīīīī
ī
īÆīīīīīīīī“īīīīīīī, and then press the
v
button. The Wired Network Settings
screen appears.
Select the Internet Protocol Setup field, īīī
and then press the
v
button.
Press the ā²ā¼ buttons to select īīī ī®īīīīī,
and then press the
v
button.
Press the ā¼ button to go to the first īīī
entry field (IP Address).
Use the number buttons on your īīī
remote to enter numbers.
When done with each field, use the ā¶ īīī
button to move to the next field. You
can also use the other arrow buttons to
move up, down, and back.
Enter the īīī īŖī±īī¢ī
ī
īīīī, ī“īīīīīīī®īīī, and
īØīīīīīī values in the same way.
Press the ā¼ button to go to īīīī ī„īÆī“.
Press the ā¼ button to go to the first īīīī
DNS entry field.
Enter the numbers as above.īīīī
Press the īīīī ī³ī¦īµī¶ī³īÆ button on your
remote control.
Run a Network Test to ensure the player īīīī
has connected to your network
.
īÆīīīīīīīīµīīī
Use this menu item to check whether
your network connection is working
or not.
īÆīīīīīīīī“īīīīī
Use to check whether a connection to
a network and the Internet has been
established.
Network Settings
Please contact your ISP to find out if
your IP address is static or dynamic.
If it is dynamic - and most are - we
recommend using the Auto procedure
for network setup. This is easiest and
will work in the majority of cases.
If it is static, you must use the manual
set up procedure.
Network setup directions start below
.
īÆī°īµī¦
ī
ā
This unit can only be connected to
ā
a Network via a wired connection
.
īøīīīī
īīÆīīīīīīīī“īīīīīīī
In the Home menu, press the ā²ā¼āā¶ īīī
buttons to select ī“īīīīīīī, and then
press the
v
button.
Press the ā¼ā² buttons to select īīī
īÆīīīīīī, and then press the
v
button.
Press the ā¼ā² buttons to select īīī īøīīīī
ī
īÆīīīīīīīī“īīīīīīī, and then press the
v
button. The Wired Network Settings
screen appears
.
Picture
Sound
Network
System
Language
Security
General
Support
Settings
Wired Network Settings
Internet Protocol Setup : Auto
ā¶
IP Address :
0
0
0
0
Subnet Mask :
0
0
0
0
Gateway :
0
0
0
0
DNS : Auto
DNS Server :
0
0
0
0
>
Move
"
Select
'
Return
ī„īīīīīīīÆīīī
The Device Name function allows
you to change the player's name by
selecting from a device name list.
ī£ī„īīīīīīīŖīīīīīīīīī¤īīīīīīīīī
Set to allow or prohibit an Internet
connection when you use the BD-
LIVE service.
ī¢īīīīīīī¢īīī
ā
: The Internet
connection is allowed for all BD-
LIVE contents.
ī¢īīīīīīī·īīīī
īī°īīīī
ā
: The Internet
connection is allowed only for BD-
LIVE contents containing a valid
certificate.
ī±īīīīīīī
ā
: No Internet connection is
allowed for any BD-LIVE content.
īÆī°īµī¦ī“
ī
ā
What is a valid certificate?
ā
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc, the
server uses the transmitted data to
check if the disc is valid and sends
the certificate back to the player.
The Internet connection may be
ā
restricted while you are using BD-
LIVE contents
.
In the Internet Protocol Setup field, īīī
select Auto if it is not selected. (Press
v
to select ī¢īīī, and then press
v
.)
The Auto Function acquires and fills in īīī
the values for īŖī±īī¢ī
ī
īīīī, ī“īīīīīīī®īīī,
etc., automatically.
īÆī°īµī¦
ī
ā
This process can take up to five
ā
minutes.
After the Network Function has īīī
acquired the network values, press the
ī³ī¦īµī¶ī³īÆ button.
Select īīī īÆīīīīīīīīµīīī, and then press
v
to ensure the player has connected to
your network.
When the Network Test is complete, īīī
press the ī³ī¦īµī¶ī³īÆ twice to return to the
Main Menu.
If the Network Function does not īīī
acquire the network values, go to the
directions for Manual Setup
.
ī®īīīīīīīÆīīīīīīīī“īīīī
Before you start manual network setup,
you need the network setting values.
To get the network setting values,
contact your ISP (Internet Service
Provider) or your network administrator.
īµīīīīīīīīīīīīīÆīīīīīīīī“īīīīīīīīīīīīī
īīīīīīīīīīīīīīīīīīīīīīīīīīīīīīīī
In the Home menu, press the ā¼ā²āā¶īīī
buttons to select ī“īīīīīīī, and then
press the
v
button.
Press the ā²ā¼ buttons to select īīī
īÆīīīīīī, and then press the
v
button.
To Next Page
Loading...
Need help?
General
