Connecting to an Audio System
You can connect the Blu-ray player to an audio system using one of the
methods illustrated below.
-
Do not connect the power cord to the wall outlet until you have made all
the other connections.
-
When you change the connections, turn off all devices before you start.
●
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your receiver.
●
Best quality (Recommended)
●
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital
Audio Out jack on the product to the Digital Coaxial In jack of the receiver.
●
Good quality
●
You will hear sound only through the front two speakers with Digital Output
set to PCM.
AudioAudio
Connecting to a Network Router
You can connect your player to your network router using one of the methods
illustrated below.
To use DLNA network functionality, you must connect your PC to your network
as shown in the illustrations.
The connection can be wired or wireless.
Or
✎
■
Internet access to Samsung's software update server may not be allowed,
depending on the router you use or your ISP's policy. For more information, contact
your ISP (Internet Service Provider).
■
DSL users, please use a router to make a network connection.
To Next Page
Loading...
Need help?
General
