Disassembly and Assembly
61
Cables Assembly
Leaving screws inside the computer may damage internal components, such as
the battery. When assembling, be extra careful not to leave any unassembled
screws inside the computer.
1 Assemble the fingerprint power button.
Open the lever of each connector by using the opening tool.
Insert each cable into its connector by using the tweezers, and then and close levers.
•
Make sure that the connector guideline and the lever are assembled
horizontally.
•
All connectors with guidelines must be assembled to the guidelines.
•
The guide line of each cable should be located to the edge of its connector lever
after inserting.
To Next Page
Loading...
Need help?
General