Preventing the TV from falling
1. Using the appropriate screws, rmly fasten a set of brackets to the wall.
Conrm that the screws are rmly attached to the wall.
– You may need additional material such as wall anchors depending
on the type of wall.
2. Using the appropriately sized screws, rmly fasten a set of brackets to
the TV.
– For the screw specications, refer to the standard screw part in the
table under "Mounting the TV on a wall".
3. Connect the brackets xed to the TV and the brackets xed to the wall
with a durable, heavy-duty string, and then tie the string tightly.
– Install the TV near the wall so that it does not fall backwards.
– Connect the string so that the brackets xed to the wall are at the
same height as or lower than the brackets xed to the TV.
Detach the Cover-terminal stand from the TV
Detach the Cover-Clean Back terminal from the TV
English - 12
To Next Page
Loading...
Need help?
General