CHANGING THE WATER FILTER
The "Filter Indicator" light lets you know when it is time to change your water filter cartridge. To
give you preparation time to get a new filter, the red light will come on just before the capacity
of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest
water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months in the future. For example, if you are replacing
the water filter in March, put the "SEP" (September) sticker on the filter to remind you to replace in
September. Normal filter life is about every 6 months.
2. Remove the new filter's protective cap and remove the old filter.
3. Position and insert the new filter into the filter housing.
Slowly turn the water filter clockwise to align with the printing mark on the cover, locking the filter
in position. Make sure to align the water filter label mark with the center of cover filter printing as
illustrated. Remember, do not over-tighten.
Cover
4. Once you have completed this process, hold the Fridge ÷ Power Cool button simultaneously for 3
seconds to reset the filter schedule.
38 °F is Recommended
Power Coo_
5. Lastly, run about six glassfuls of water through water dispenser and throw away.
Make sure that water flows clearly again before drinking.
A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser.
Do NOT use the water or ice dispenser without a water filter cartridge because the water line may
become blocked.
Ordering replacement filters
To order more water filter cartridges, call 1-800-SAMSUNG and ask for accessory Part #DA29-
00003B or contact your authorized dealer.
To Next Page
Loading...
Need help?
General
