Samsung RSA1D series User Manual

22
_ setting up
LEVELING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so
you can then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors
perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than the fridge
Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to
level the freezer.
When the Freezer door is higher than the fridge
Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to
level the fridge.
Refer to the next section for the best way to make very minor adjustments to the doors.
Leg
Leg
Screw Driver
Screw Driver
Caution:The legs of product are unconnected when it is out of factory. Make sure to adjust the
legs to touch the floor, and make the product level before using.

Samsung RSA1D series Specifications

General

Brand	Samsung
Model	RSA1D series
Category	Refrigerator
Language	English