Samsung RV508 User Manual

72
Changing the Boot Priority
The default boot priority of your computer is the CD-ROM rst, then a removable device
and then the hard disk drive in this order.
By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an
example, the procedures to change the highest boot priority device to the hard disk drive
are described below.
1
Select the Boot menu in the BIOS
Setup.
2
Press < Enter > on the Boot Device
Priority item.
3
Press the down key (↓) to move to the
AHCI HDD item and press the
F6 key to
move up to the top item.
4
Press the F10 key to save the settings
and exit Setup. The highest boot
priority device is now set to the Hard
Drive.
XXXXXXXX
Boot Device Priority
[Boot priority order]
1. AHCI CD : N/A
2. AHCI HDD : XXXXXXXXXXXXXXXX
3. USB KEY : N/A
4. USB CD : XXXXXXXXXXXXXX
5. USB FDD : N/A
6. USB HDD : N/A
7. PCI BEV : N/A
8.
- IDE HDD : N/A
- IDE CD : N/A
- PCI SCSI : N/A
- USB ZIP : N/A
- USB LS120 : N/A
[Excluded from boot order]

Samsung RV508 Specifications

General

Storage	500GB HDD
Operating System	Windows 7 Home Premium
Battery	6-cell
Optical Drive	DVD Super Multi
Wireless	802.11 b/g/n
Ports	3 x USB 2.0, VGA, HDMI, RJ45, Headphone, Microphone
Display	15.6" HD (1366x768) LED Backlit
Card Reader	3-in-1