69
using tools and applications
3. Select an image or video category → an image
or video and select Add.
For an image, select the duration that the image
displays.
4. Select More → Files to add more images or
videos.
5. Select Edit → Trim.
6. Select to play the video and select Start
mark at the point where you want the new video
to begin.
7. Select End mark at the point where you want
the new video to end.
8. Select Trim.
9. When you are finished, select More → Export →
Video → Yes.
To save the project for future use, select
More →
Files → Save project
. The project will be saved
in
Other files
.
10. Enter a new file name and select Done.
11. To check the file, select Yes (if necessary).
Split videos
1. Open images and videos to be edited. Refer to
steps 1-4 in “Trim any segment.”
2. Select Edit → Split.
3. Select to play the video and select Split
point → Split to divide the file into two clips.
4. Insert an image or video as desired between the
clips.
5. Save the edited video with a new file name. Refer
to steps 9-11 in “Trim any segment.”
To Next Page
Loading...
Need help?
General
Weight and Dimensions
