English - 14
Adjusting the camera angle
The initial shape of the camera To adjust the camera angle downwards To adjust the camera to the front
The adjustment part of the
camera's angle
Simultaneously press the TV camera
and adjust the angle.
Put your finger on the adjustment part
of the camera's angle and adjust the
angle upwards, pulling it in the direction
of the arrow.
Initial setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup
process, including the selecting the menu language, scanning channels, connecting to the network, and more. During each
step, either make a choice or skip the step. You can manually perform this process at a later time in the
System
>
Setup
menu.
- If you connect any device to
HDMI1
before starting the installation, the
Channel Source
will be changed to
Set-top box
automatically.
- If you do not want to select
Set-top box
, please select
Aerial
.
Password Change
System
>
Change PIN
Changing the TV’s password.
1. Run
Change PIN
and then enter the current password in the password field. The default password is “0-0-0-0”.
2. Enter a new password and then enter it again to confirm it. The password change is complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “0-0-0-0”:
When the TV turns on:
MUTE
→ Volume up →
RETURN
→ Volume down →
RETURN
→ Volume up →
RETURN
[HU9000-XA-KE]BN68-06778C-02ENG.indb 14 2014-11-10 오후 1:06:10
To Next Page
Loading...
Need help?
General