Changing the camera’s focus
Shooting options
57
Using tracking auto focus
Tracking AF allows you to track and automatically focus on your subject, even when
you are moving.
1
In Shooting mode, press [ ].
2
Select Focus Area → Tracking AF.
3
Focus on the subject you want to track, and then press [ ].
•
A focus frame appears on the subject and follows the subject as you move
the camera.
Tracking AF
•
The white frame means that your camera is tracking the subject.
•
When you half-press [Shutter], the green frame means that your subject is in
focus.
•
The red frame means that your camera failed to focus.
4
Press [Shutter] to capture the photo.
•
If you do not select a focus area, the focus frame will appear in the center of the
screen.
•
Tracking a subject may fail when:
-
the subject is too small
-
the subject moves excessively
-
the subject is backlit or you are shooting in a dark place
-
colors or patterns on the subject and the background are the same
-
the subject includes horizontal patterns, such as blinds
-
the camera shakes excessively
•
When tracking fails, the feature will be reset.
•
If the camera fails to track the subject, you must reselect the subject to track.
•
If the camera fails to focus, the focus frame will change to red and the focus will
be reset.
•
If you use this function, you cannot set Face Detection options, Timer options,
Burst options, and Intelli zoom.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
