34 English
Operations
Operations
Control panel
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time remaining,
or an information code when a problem occurs.
03 Temp.
Press to change the water temperature for the current cycle.
Available temperature range depends on the cycle. The selected
temperature will be displayed on the display.
04 Spin
Press to change the spinning speed for the current cycle.
Available spin speed depends on the cycle. The selected spin speed will be
displayed on the display.
05 Delay End
Press Delay End repeatedly to cycle through the available Delay End
options (from 3 to 24 hours in one hour increments).
06 Start/Pause
Press to start or pause operation.
Press the button once to start a cycle.
To pause operation, press the button again. You may change the cycle
settings and options.
To resume paused operation, press the button again.
07 Power
Press to turn on or off the washing machine.
If you turn on the washing machine and do not use it for 10 minutes, it will
turn off automatically.
*(3 sec) : Press and hold for 3 seconds.
WW3000TM_7-9KG_Kuwait_8C104-000586_EN.indd 34WW3000TM_7-9KG_Kuwait_8C104-000586_EN.indd 34 2021-01-15 4:08:522021-01-15 4:08:52
To Next Page
Loading...
Need help?
General