EasyManuals Logo
Home>Sanyo>Stereo System>AWM-660

Sanyo AWM-660 User Manual

Sanyo AWM-660
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
MA
DC
K
5 3,6
1
2
-E11-
LISTENING TO THE TAPES
LISTENING TO PRESET STATIONS
Program stations as described in “TO PRESET STATIONS”.
Preset tuning (Remote control only)
1. Press [TUNER/BAND] to select AM or FM.
2. Press [TU PRESET] to select the desired program number.
The selected channel number appears.
The number buttons on the remote control can also be used.
Press two buttons within 2 seconds.
Preset scan tuning (Remote control only)
1. Press [TUNER/BAND] to select AM or FM.
2. Press and hold down [TU PRESET] for at least 1 second.
The preset stations are selected in sequence for approxi-
mately five seconds each.
3. Press [TU PRESET] when the desired station has been selected.
Preset scanning will stop.
Changing the reception frequencies
It is not necessary to perform this procedure in the U.S. and
Canada.
1. Select the band to be changed.
2. While pressing [ N ] on the front panel, press [TUNING -] on
the front panel for at least 1 second.
AM: 520 ~ 1710 kHz (10 kHz steps)
522 ~ 1710 kHz (9 kHz steps)
FM: 87.9 ~ 107.9 kHz (200 kHz steps)
87.5 ~ 108.0 MHz (50 kHz steps)
NOTES:
To receive an FM stereo broadcast, make sure that “MONO” is
not displayed. If “MONO” appears, press [FM MODE/REPEAT]
on the remote control to turn the “MONO” indication off. “ ST
appears when an FM stereo broadcast is received.
If the signal from an FM stereo stations is weak and reception is
poor, press [FM MODE/REPEAT] on the remote control to
change to monaural reception. (“ ST ” is replaced by “MONO” in
the display.)
v
v
v
v
1. Press [FUNCTION] to select “TAPE”.
2. Slide the cassette door backward to operate the cassette buttons.
3. Press [STOP/EJECT] to open the cassette holder.
4. Load the cassette.
After loading the cassette, press the cassette holder back into
position.
Don’t push the cassette door forward before pressing the
cassette holder down.
5. Press [PLAY] to begin playback.
6. Press [STOP/EJECT] to stop playback at any time.
When the end of the tape has been reached, automatic stop will
be activated.
TUNER
/BAND
STOP/EJECT
PLAY
A
AWM-660/US Eng page 4/16/04, 5:40 PM12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo AWM-660 and is the answer not in the manual?

Sanyo AWM-660 Specifications

General IconGeneral
BrandSanyo
ModelAWM-660
CategoryStereo System
LanguageEnglish

Related product manuals