EXT.ANT
AM
LOOP
FM
ANT
PHONES
SPEAKERS
(4Ω MIN.)
RL
-E4-
To an AC 120V outlet
R ch speaker
L ch speaker
AM loop antenna
FM antenna
Power supply
Connect the power cord to a 120V AC 60Hz outlet. This unit is
equipped with a polarized plug. If you have difficulty inserting the
plug, turn it over and reinsert it. If the unit will not be used for a long
time, disconnect the AC plug from the AC outlet.
NOTES:
• Before plugging the power cord into an AC outlet, make sure
that all the connections have been made.
• The system is not disconnected from the AC power unless the
power cord is unplugged from the AC outlet.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU’ AU FOND.
Speakers terminals (SPEAKERS)
To achieve proper stereo reproduction, identical connections must
be made at the speakers and this unit.
Connect the connector of the left speaker cable to the SPEAKERS
L jack.
Connect the connector of the right speaker cable to the SPEAK-
ERS R jack.
If you have difficulty inserting the speaker cable connector, turn it
over and reinsert it.
Headphones jack (PHONES)
Connect a pair of stereo headphones with miniplug (not available
from SANYO) to the PHONES jack (the back of the unit) for moni-
toring or for private listening. The speakers are automatically dis-
connected when headphones are connected.
Need help? Call
1-800-813-3435
AWM-660/US Eng page 4/16/04, 5:40 PM5
To Next Page
Loading...
Need help?
General
