Sanyo CP32WF2 User Manual

SERVICE MANUAL Colour Television
Specifications
Power Source . . . . . . . .AC220 - 240V, 50Hz.
Colour System . . . . . . .PAL, SECAM, NTSC4.43, NTSC
Television System . . . . .B/G, DK, I, L/L
Channel Coverage . . . .VHF: 0-11, 5A (Australia), 1-11 (New Zealand)
E2-E12, F2-F10, R1-R12
UHF: 28-69 (Australia), 21-69 (New Zealand)
CATV: S1-S41, X, Y, Z, B-Q
Aerial Input Impedance 75Ω
Ext.Terminals
AV1 (Rear): CENELEC Standard
Input (Composite video, RGB and Audio-L/R)
Output (TV-output with composite video and Audio-L/R)
AV2 (Rear): CENELEC Standard
Input (Composite video, RGB, S-VHS and Audio-L/R)
Output (Monitor output with composite video and Audio-L/R)
AV3 (Front): Phone jac
k (Composite video input and Audio-L/R input)
Headphone Jack: Mini Stereo Jack
Speaker . . . . . . . . . . 6 cm ✕ 12 cm ✕ 2 pcs.
Sound Output (Music). . . .12W + 12W
Dimensions . . . . . . . . . . 880 (W) ✕ 575 (H) ✕ 549 (D)mm
Weight . . . . . . . . . . . . . . .approx. 55 Kg
Specifications subject to change without notice
F8WZ/F8WY
FILE NO.
Model No. CP32WF2
(Australia/New Zealand)
Give complete “SERVICE REF. NO.” for parts
order or servicing. It is shown on the rating label
at the cabinet back of the unit.
This T.V. receiver will not work properly in
foreign countries where the television
transmission system and power source dif-
fer from the design specifications. Refer to
the specification table.
Product Code:111371219
REFERENCE NO. SM5110636
PP
+
-
Original Version
Chassis Series: EB7-A
Service Ref. No. CP32WF2-00
(Australia)
CP32WF2-50
(New Zealand)
- NOTE -
Service Ref. No. CP32WF2-50 is electrically the
same as Service Ref. No. CP32WF2-00.
The difference between Service Ref. No.
CP32WF2-00 and CP32WF2-50 is as follows:
1) Destination CP32WF2 -00...Australia
CP32WF2 -50...New Zealand

Sanyo CP32WF2 Specifications

General

Brand	Sanyo
Model	CP32WF2
Category	TV
Language	English