Sanyo CP32WF2 User Manual

Option Setting
-8-
After replacing the Memory IC (IC803)
The memory IC (IC803), stores the option data of TV set and service adjustments data for each circuit, therefore, when
the memory IC is replaced, it should be programmed to the following settings and “ SERVICE ADJUSTMENT” on
pages 9 to 12.
1) To enter to the Option Mode
Press and hold the F/OK button on the remote control and Programme down button (P▼) on the front panel of
the TV. The option window will appear on the screen.
PP
+
-
ON- TIMER
SORT MODE
P&P
Wel. Text
Comb Filter
WSS
- Aust
Auto Volume
3D Surround
Country
AV3
CS/A,B
ON
Tuning
ON
ON
OFF
ON
OFF
ON
BG/DK/I/LL'
ON
CS
Option Mode
2) To set the Option Mode
Select the desired option item by pressing the Programme down or up button.
To switch the option mode, use the Level up or down button.
The data which is set in the option mode is stored into the memory IC automatically.
The following table shows the available option items and default setting mode.
Option Mode Mode Description & Note
ON-TIMER ON or OFF On-timer available, default “ON”
SORT MODE Sorting or Tuning Tuning mode, default “TUNING”
P & P ON or OFF Plug & Play mode, default “ON”
WEL. TEXT ON or OFF Display message when first set up, default “ON”
Comb Filter OFF or ON For factory use, default “OFF”
WSS-Aust ON or OFF Default “ON”
Auto Volume ON or OFF Auto volume, default “OFF”
3D Surround ON or OFF Default “ON”
Country UK or IRE or B/G, D/K, I, L/L’ TV system, default “ B/G, D/K, I, L/L ”
Wide ON or OFF Wide mode, default “ON”
AV3 ON or OFF Front AV disable, default “ON”
CS/A,B CS or A/B Default “CS”
3) Exit from the Service Mode
Press the Programme information call button or turn off the TV set by using the mains switch.

Sanyo CP32WF2 Specifications

General

Brand	Sanyo
Model	CP32WF2
Category	TV
Language	English