Sanyo DVW-7100 User Manual

PREPARATION
15
Before Operation - VCR Part (Continued)
Setting the VCR Setup Menu
11
Press MENU and the MAIN menu will appear.
22
Press
vv
/
VV
to select the SETUP menu, then
press SELECT/ENTER (

).
The SETUP menu will appear.
33
Use
vv
/
VV
to choose an option from the SETUP
menu, then use
bb
/
BB
to choose a setting.
FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or
off.
 FUNCTION OSD can be switched between ON and OFF by
pressing b/B.
44
Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:

Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
11
Press MENU and the MAIN menu will appear.
22
Press
vv
/
VV
to select the TUNING menu, then
press SELECT/ENTER (

).
The TUNING menu will appear.
33
Press
VV
to choose the SOURCE SELECT option,
then press
bb
/
BB
to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1
and LINE2.
44
Press
vv
/
VV
to choose the AUTO CHANNEL SET
option, then press
bb
/
BB
to set the channel.
• The tuner will automatically cycle through all
available channels (TV/CATV) in the area and
place them in the tuner’s memory.
• After the AUTO CHANNEL SET is complete, the
TUNING menu will hide and return to the TV
screen automatically.
55
Make sure the TUNING BAND is set appropriate-
ly (TV or CATV).
• TV : If you are using a standard antenna to
receive channels.
CATV : If you are using basic cable to receive
channels.
• Change the setting of TUNING BAND to check the
TV channels.
66
Use CH/TRK (
vv
/
VV
) on the remote control or
CHANNEL (
VV//vv
) on the front panel to cycle the
DVD+VCR through the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMO-
RY
This feature allows you to add or erase channels from
memory manually.
1 Press
VV
to choose the CH. ADD/DEL option on the
TUNING menu. Press b/B to select a channel to
add or erase.
2 Press SELECT/ENTER (

) to add or erase the
channel.
Repeat steps 1 and 2 to add or erase channels.
3 Press MENU to return to the TV screen.

Sanyo DVW-7100 Specifications

General

Brand	Sanyo
Model	DVW-7100
Category	DVD VCR Combo
Language	English