Sanyo DWM-400 User Manual

FILE NO.
Notice
CORRECTION
SERVICE FLASH
PRODUCTION CHANGE
ADD INFORMATION
Please add this notice to the Service Manual listed below.
Category : Date :
Model :
Destination : Reference No. : Issue Number :
REFERENCE No. SM5810540-01
Mar. / '04 BB Printed in Japan.
For Parts or Service Contact
SANYO Fisher Service Company (US)
A Division of SANYO North America Corporation
21605 Plummer Street, Chatsworth, California 91311
V
DVD Video Player
DWM-400
Mar. 2004
US
SM5810540
1
Prod. Code : 137 123 00
There are two kinds of this model.
Type A : The DVD mechanism of part code "645 066 3802" is used for this type.
The 10th figure of a serial number is nothing or "A".
Type B : The DVD mechanism of part code "645 068 7495" is used for this type.
The 10th figure of a serial number is "B" or "C".
The differences between Type A and Type B are a DVD driver and a main p.w.board.
An original service manual is Type A.
The changed part of the main board of Type A.
The following parts be not available as service parts.
IC103(parts code : 645 067 9445) in Main p.w.board(Rev.A , Rev.B and Rev.C)
IC103(parts code : 645 067 9421 , 645 067 9438 and 645 067 9452) in Main p.w.board(Rev.C)
(Type B)
DVD MECHANISM REPLACEMENT
(Caution)
Before disconnecting FFC
cable, make it "SHORT" as
shown left.
After connecting FFC
cable,make it "OPEN" as
shownleft.
(OPEN)(SHORT)

Sanyo DWM-400 Specifications

General

Brand	Sanyo
Model	DWM-400
Category	DVD Player
Language	English