Sanyo FW55D25F User Manual

Watching Channels from an External
Device
Switching Each Input Mode can easily switch with the Remote Control
between TV (DTV or Analog TV) and External Devices when they are
connected to the Unit.
1
Turn On the Set-top Box or the Connected Device.
●
The picture from the Set-top Box or the Connected Device might
appear Automatically on the TV screen.
If the picture does not appear
① Press SOURCE Repeatedly to select the Set-top Box or the
Connected Device and wait a few seconds between each selection
until the Picture appears.
●
Pressing H reverses the direction of the Input modes.
11.1
PC
Video
Component
HDMI2HDMI1
PC
Video
HDMI2
HDMI1
TV
Source
or
DTV / Analog TV
channel
e.g.)
HDMI3
HDMI3
② Use the Remote Control for the Set-top Box or the Connected Device
to select Channels to view.
Changing Picture and Sound Settings
1
Press PIC/SOUND MODE to set your TV to a predefined Picture
and Sound setting.
2
Use H I to select one of the following settings :
Auto
picture
Auto sound Description
Personal
The Customized Settings you defined
using the Picture and Sound menu
Standard
For normal TV viewing
Vivid
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Sports
Brilliant picture settings and clear sound
for high action
Movie
Deep picture and powerful sound settings
for a cinematic experience
Game
– Optimized for PCs and game consoles
Eco
–
Eco TV settings for low Power
Consumption
–
Music
Optimized for Music Playback
–
News
Controls Picture Tone and Sets the
Anchor's Voice at a comfortable volume
level
Sleep Timer
Sleep Timer can set the Unit to go into Standby mode after an
incremental period of time.
Press SLEEP Repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP Once to call up the display for checking the remaining
time.
●
To cancel Sleep Timer, press SLEEP Repeatedly until Off is displayed.
Freeze Mode
Freeze Mode can freeze the image shown on the TV
screen for 5 minutes.
Press FREEZE to freeze the image.
●
The Sound Output will not be paused.
●
To cancel Freeze Mode, press any keys except B.
Switching Audio Mode
Digital TV Operation
1
Press SAP to display the currently selected
Language and the number of available Languages.
2
Press SAP Repeatedly to cycle through the
available Audio Languages.
11.1
1/3
English
Note(s)
●
Available Languages differ depending on the Broadcast.
●
Other is displayed when the Audio Language cannot be acquired or the acquired Languages
are other than English, French or Spanish.
Cable / NTSC (Analog) TV Operation
1
Press SAP to display the currently selected Audio mode.
2
While receiving an MTS broadcast, press SAP
Repeatedly to cycle through the available Audio
Channels.
e.g.) When All Audio Modes are available
SAP / STEREO
SAP / MONO
SAP / STEREO
11
SAP / STEREO
Stereo : Outputs Stereo Audio
SAP : Outputs a Second Audio Program
Mono : Outputs Mono Audio
120 min.Sleep timer
Freeze
17
.English
Continued on next page.

Sanyo FW55D25F Specifications

General

Brand	Sanyo
Model	FW55D25F
Category	HDTV
Language	English