Sanyo FXCD-550 User Manual

-16-
CLOCK
DISPLAY MODE CHANGE
.......................................... 1
The display on the unit can be changed by pressing DISP button  . Press the DISP button  to switch
between the clock and audio display. When a radio, tape and CD function is performed while the time display
is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.
ADJUSTING THE TIME
.............................................. 1, 2, 3
To adjust the time, press the DISP button  for more than 2 seconds. The time display blinks.
To adjust the minute, press the FF + button  .
To adjust the hour, press the - REW button  .
To advance the time rapidly, hold the FF + or - REW button continuously.
Press DISP button  again to start the clock.
CLOCK RESET
......................................................... 1, 4
Press DISP button  for more than 2 seconds and the time display blinks. While blinking, press preset
button 6  to skip to the nearest half-hour as follows:
Example: 3:00 ~ 3:29 3:00
3:30 ~ 3:59 4:00
3
4
2
1
• This unit uses a 12-hour clock.
• The clock function and radio presets are retained in memory when the audio is switched off.
Notes

Sanyo FXCD-550 Specifications

General

Brand	Sanyo
Model	FXCD-550
Category	Car Receiver
Language	English