Adjusting the Computer Image & Setting Hotel Mode & Using MUSIC Player
Adjusting the PC image
To adjust the computer image:
1
Press 5 or 6 repeatedly to scroll the menu page until you
select the Screen item, then press 4or OK to access.
2
Press MENU. The on-screen menu opens with PICTURE
menu displayed.
!
such as position and phase.
! Horizontal Pos. — Moves the image right or left.
! Vertical Pos. — Moves the image up or down.
! Size — Adjust the horizontal width of the image on the
screen.
! Phase — Adjusts the focus of stable images.
Auto Adjust — Automatically adjusts the image settings
4
Press 6 or 5 to highlight an option, press 3or 4 to adjust
the level, or press OK to confirm. You can select:
3
To close the menu, press EXIT button.
Setting Hotel Mode
To set Hotel Mode
Screen
Before adjusting the screen, make sure that you select the
correct source (D-SUB).
Horizontal Pos.
50
Vertical Pos.
50
Phase
Size
60
Auto Adjust
Hotel Mode feature enables you to lock CHANNEL menu, set
maximum volume, lock other sources except AV, lock panel
buttons, etc. which is especially useful at Hotel environment.
Volume Max
AV Lock
Press < OK > to Save
Panel Lock
100
Off
Off
RF Auto
Off
1
Press INPUT button. The Input Source menu opens.
2
Press number buttons: [ 5, 8, 2 ] to access the Hotel Mode
screen. Be sure to quickly input the numbers while the
Input Source menu is still visible.
3
Within the menu, press 6 or 5 to highlight an option, press
3or 4 to adjust the option. You can select:
4
Press OK to save the setting. Press EXIT to exit the menu screen directly.
!
and can not be accessed. To cancel the lock, set it to Off.
! Volume Max — Sets the maximum volume (30–100) for the TV.
! AV Lock — Turns On to fix the input source to AV, only AV programme can be viewed while all other
sources are blocked. To cancel the lock, set it to Off.
! Panel Lock — Turns On to lock panel buttons, buttons on the control panel on the TV are not active. To
restore, set it to Off.
! RF Auto — When On is set, the TV will automatically go to standby if without RF signal input for several
minutes. If Off is set, the TV will still work even if there is no RF signal input.
Channel Preset Lock — Turns On to lock the CHANNEL menu, the CHANNEL menu will be grayed out
29
Channel Preset Lock
On
HDMI Black Level
Normal
50
PICTURE SOUND TIME OPTION LOCK CHANNEL
PICTURE SOUND TIME OPTION LOCK CHANNEL
HOTEL MODE
Select
Move
MENU
Return
Select
Move
MENU
Return
Using MUSIC player
You can connect your MP3 player to MUSIC jack on the TV side to listen to music from your TV.
Be sure to switch to Music source firstly by pressing INPUT button.
During music playing and you want to save power, please go to OPTION menu and set Audio Only to Power
Saving, then a message “Audio Only, it will go to power saving mode” appears, after some seconds the
backlight will turn off automatically.
To Next Page
Loading...
Need help?
General
