Memorizing the Channels
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
1
Press MENU. Press 3or4to select CHANNEL menu, press
6 to access.
All ATV/DTV channels available in your area will be searched and
stored into memory. Please wait until the searching is complete.
During the process, if you want to skip, press MENU. To exit
searching, press EXIT.
Auto Tuning
3
Highlight Auto Tuning item, and press 4or OK to access.
2
4
5
Now a pop-up screen opens with Country selection
highlighted. Press 3or4 to select your region: Australia or
New Zealand. Then press 6 to highlight Start, simply press
OK to begin the auto tuning.(If you want to cancel, press4to
select Cancel and press OK.)
Auto Tuning
Auto Tuning will completely re-tune the TV and can be used to
update the channel list.
It is recommended that Auto Tuning is run periodically to ensure
that all new services are added. All current channels and settings, e.g.
locked channels, will be lost.
Note:
As new services are broadcast, it will be necessary to retune the TV in
order to view them.
Cancel
Start
Go to Input Source menu and select ATV or DTV first.
DTV manual tuning - digital only -
1
2
3
4
ATV Manual Tuning
Programme Edit
Auto Tuning
DTV Manual Tuning
This feature is available for service engineers or can be used for direct
channel entry if the multiplex channel is known.
Press 3or4 button to select your desired multiplex number.
If the selected channel has no signal, “NO SIGNAL” will appear.
In CHANNEL menu, press 6or5 to select DTV Manual
Tuning, then press4or OK to access.
Press OK to begin the search for that multiplex.
At the bottom of the menu screen the DTV Signal strength bar
is displayed. You can make use of it to check how strong your
DTV signal is and whether you need to adjust your antenna. The
higher the signal strength is, the less likely you are to experience
picture degradation.
When the multiplex is found, any channels that are not currently
in the channel list will be added and the channel information will
be updated.
During the process, you can press MENU or EXIT to exit the
search.
Note: If the Lock System is On, CHANNEL menu can not be operated without password. For details, please see
<Setting Child and Rating Locks> section.
PICTURE SOUND TIME OPTION LOCK CHANNEL
PICTURE SOUND TIME OPTION LOCK CHANNEL
17
DTV Manual Tuning
Searching, Please Wait ...
Bad
Good
Normal
UHF CH 45
Return
OK MENU
Search
Country selection
Australia
Select
Move
MENU
Return
Select
Move
MENU
Return
To Next Page
Loading...
Need help?
General
