Computer Input
When Digital zoom + is selected, the On-Screen Menu
disappears and “D. zoom +” is displayed. Press the SELECT
button to expand the image size. Use the Point ed7 8
buttons to pan the image. The Panning function can work
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM e button on the remote control.
Digital zoom +
Digital zoom - is used to reduce the image size into its
original size when the image size is expanded.
When Digital zoom – is selected, the On-Screen Menu
disappears and “D. zoom –” is displayed. Press the SELECT
button to compress image size. The projected image can be
also compressed by pressing the D.ZOOM d button on the
remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ed, SELECT, and Point buttons.
To return to the previous screen size, select a screen size in
the Screen Size Adjustment or select an input source from
the Input Source Selection (p.27) again, or adjust the screen
size with the D.ZOOM ed buttons.
Digital zoom –
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
For zooming in and out the images
✔Note:
• The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.31).
• True, Full, and Digital zoom +/– cannot be
selected when 480i, 575i, 480p, or 575p
is selected in the PC System Menu (p.28).
• Digital zoom +/– cannot be selected when
Full or True is selected.
36
To Next Page
Loading...
Need help?
General
