44
Chapter 4 Controlling the Projector
Information
This page is to display the basic information of the projector status. Click
Information on the main menu.
Click this button to
update the information.
Items Description
Input ............................................Displays selected input and source.
System .......................................Displays selected signal system.
Signal ..........................................Input signal status (Yes, No)
Screen ........................................Displays screen mode.
PJ time(h) .................................
Displays the accumulated use time of the projector.
Lamp mode ............................
Displays the current "Lamp mode".
Lamp control .........................
Displays the current "Lamp control".
Lamp interval ........................
Displays the current "Lamp interval".
Lamp status
............................. Displays the status of the 4 lamps with an icon. Refer to the table on page
46.
Lamp Corres. Value(h) ..... Displays the use time (Corresponding value) of the 4 lamps.
* When PIP mode is active, displays Input, System, and Screen to "PIP mode".
Information 1
To Next Page
Need help?
General