Sanyo TRC6100 User Manual

GENERAL REMARKS |
e Before disassembling the unit, spread a soft rubber mat ora
Battery
* Compartment Lid-
cloth on the workbench to avoid scratches and grease stains.
Do not use a material which is likely to cause static
| direction of the arrow.
e
CABINET TOP REMOVAL
1.
Remove the three screws (7 ~ 9). After lifting up the cabinet
Top lightly in the direction of the arrow (1), slide it in the
direction of the arrow (2).
Once again, slide the Cabinet Top in the direction of the
arrow (3) while lifting it. When the Cabinet Bottom and
Cabinet Top is removed, the Cabinet Mic. and Mic.
Sensitivity Knob can be detached from the unit.
@
electricity because the transistors and ICs may be easily
damaged by it.
© When mounting the P.C.Board; confirm that the leads,
resistors, capacitors, etc., do not contact the function
mechanism such as gear or belt. Also refer to the Exploded
Views.
?
ey
stems
ve
FF
@ Reassemble the unit, noting the kinds, of-serews, the:
soldering and arrangement of the leads. Refer to’ “Circuit ©
Diagram and Exploded Views’ for correct assembly.
-e@ Before disassembling the unit, take out the cassette tape
and the batteries.
@ Reassemble in reverse order.
CABINET BOTTOM REMOVAL
1. Remove the six screws (1 ~ 6) fastening the Cabinet Bottom
and open the Battery Compartment Lid.
2. Carefully detach the Cabinet Bottom by lifting it in the
2.
Take
out the
two
Bottom Covers
and
remove
the
two
screws
(10
and
11)
to
detach
the
Function
and
FF/REW
Knobs.
3.
Remove
the
five
screws
(12
~
16)
and
detach
the
Frame
in
the
direction
of
the
arrow.
By
removing
the
Frame,
the
Cue
Index
Button
and
Tape
Speed
Knob
can
be
detached.
AMPLIFIER FPC REMOVAL
1.
Remove
the
Cabinet
Bottom,
Cabinet
Top
and
Frame,
and
“
FRAME REMOVAL
V
Remove
the
Cabinet
Top
and
Bottom
and
unsolder
the
two
speaker
leads
(brown
and
white)
from
the
speaker
terminals.
remove
the
two
screws
(17
and
18)
fastening
the
Jack
Bracket
and
Bracket.
|

Sanyo TRC6100 Specifications

General

Brand	Sanyo
Model	TRC6100
Category	Microcassette Recorder
Language	English