EasyManuals Logo
Home>Saswell>Thermostat>SAS900STK-2

Saswell SAS900STK-2 User Manual

Saswell SAS900STK-2
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4
control to test installation. This will damage the thermostat and void the
warranty.
Do not switch the system to cool if the temperature is below 50ºF (10ºC). This
can damage the air conditioning system and may cause personal injury.
Replace batteries when the battery icon indicates the low battery message.
Change the Air Filter when the Filter Change Icon begins blinking.
Use this thermostat only as described in this manual.
REMOVE THE OLD THERMOSTAT---------------------------------------------------------------------
WARNING!: Electrical Shock Hazard
1. Turn off power at the main service panel by removing the fuse or switching the
appropriate circuit breaker to the OFF position before removing the existing
thermostat.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Saswell SAS900STK-2 and is the answer not in the manual?

Saswell SAS900STK-2 Specifications

General IconGeneral
BrandSaswell
ModelSAS900STK-2
CategoryThermostat
LanguageEnglish

Related product manuals