www.scheppach.com
30
|
GB
Uncertainty K = 1,5 m/s
2
Reduce noise generation and vibration to a
minimum!
• Use only equipment that is in perfect con-
dition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch o the equipment when not in use.
• Wear gloves.
When using the petrol lawn mower for ex-
tended periods, vibration-induced circula-
tory problems may occur (white nger dis-
ease).
We cannot give exact details about the dura-
tion of use in this case because it is dierent
for each individual.
The following factors can inuence the con-
dition:
• Circulatory problems in the user’s hands
• Low outside temperatures
• Extended periods of use
We therefore recommend you wear warm
work gloves and take regular breaks.
7. Unpacking
• Open the packaging and remove the de-
vice carefully.
• Remove the packaging material as well
as the packaging and transport bracing (if
available)
• Check that the delivery is complete.
• Check the device and its spare parts for
possible damage caused by transportation.
In the event of complaints, you must con-
tact the distributor without delay. Claims at
a later stage will not be accepted.
• If possible, store the packaging until the
warranty period has expired
• Before handling the device, make yourself
familiar with it by reading the operating in-
structions.
• For accessories, consumables and spare
parts, only use original parts. Spare parts
are available from your stockist.
• Include our item number, the device model
and year of manufacture in your order.
•
Human behaviour, misbehaviour
- For any work be fully concentrated.
m Residual risks - Cannot be entirely ex-
cluded.
Danger from noise
hearing damage
Prelonged unprotected work with the device
may cause hearing damage.
- Always wear ear-mus.
In case of emergency
In case of a possibly occurring accident take
the necessary rst aid steps as appropriate
and obtain qualied medical aid as quickly
as possible.
6. Technical data
Type engine four stroke engine/air
cooled
Cubic capacity 173cm³
Rotation speed 2800 min
-1
Max. engine
output kW
3,0 kW / 4,1 HP
Fuel Standard unleaded petrol
with max. 5% bioethanol
Capacity tank 0,85 l
Motor oil
SAE 30 / 10W30 / 10W40
Capacity tank/oil 0,4 l
Cutting height
adjustment
25-75 mm / 7 - stages
Collection bag
capacity
65 l
Cutting width 51 cm
Weight 29,4 kg
Subject to technical changes!
Information concerning noise emission
measured according to relevant standards:
Sound pressure L
pA
= 85,0 dB(A)
Uncertainty K
PA
= 3 dB(A)
Sound power L
WA
= 96,1 dB(A)
Uncertainty K
PA
= 1,83 dB(A)
Wear ear-mus.
The impact of noise can cause damage to
hearing.
Vibration A
hv
(left/right) = 7,218 m/s
2