To Next PageTo Next PageTo Previous PageTo Previous Page
How to troubleshoot Scheppach Power Hammer motor that does not start?
If the Scheppach Power Hammer's motor won't start, first, check the mains fuse. If that's not the issue, the extension cable might be defective and needs replacement. For issues related to the motor connections, switch, motor, or carbon brushes, consult an electrician.
What to do if Scheppach AB1900 motor does not work and the fuse responds?
If the Scheppach Power Hammer motor doesn't work and the fuse trips, the extension cable's cross-section may not be sufficient, refer to Electrical Connection. Another cause might be overload, so inspect the tool. For electrical defects, it's best to consult an electrician.
Why won't my Scheppach Power Hammer motor start?
If the Scheppach Power Hammer's motor won't start, first check the mains fuse. If that's not the issue, the extension cable might be defective and needs replacement. Other potential causes include disordered connections at the motor or switch, a defective motor or switch, or defective carbon brushes. For these issues, consult an electrician.
What to do if Scheppach AB1900 Power Hammer motor does not work, the fuse responds?
If the Scheppach Power Hammer's motor doesn't work and the fuse trips, it could be due to an overload, so check the tool. It may also be caused by an electrical defect; in this case, you should consult an electrician. The cross-section of the extension cable might not be sufficient, refer to Electrical Connection.
General| Soft grip | Yes |
|---|---|
| Chuck type | - |
| Product color | Blue, Grey |
| Impact energy (max) | 60 J |
| Idle impact rate (max) | 2000 IPM |
| Input power | 1900 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Number of chisels | 2 |
Weight and Dimensions| Depth | 880 mm |
|---|---|
| Width | 170 mm |
| Height | 360 mm |
| Weight | 21480 g |
Basic safety rules for maintaining a clean and safe work environment.
Precautions concerning electricity and power tools to prevent hazards.
Guidelines for operator safety, including PPE and attentiveness.
