Scheppach DM1100T User Manual

 www.scheppach.com /  service@scheppach.com /  +800 4002 4002
18
|
GB
Explanation of the symbols on the device
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompanying
explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace proper ac-
cident prevention measures.
Observe warning and safety instructions!
Before commissioning, read and observe the operating manual and safety instructions!
Wear hearing protection. Excessive noise can result in a loss of hearing.
Wear a dust protection mask. When machining wood and other materials, harmful dust
may be generated. Do not machine material containing asbestos!
Wear protective goggles. Sparks created during work or fragments, chippings and dust
ejected by the device can case sight loss.
Do not leave long hair loose. Use a hair net.
The use of gloves is prohibited!

Scheppach DM1100T Specifications

General

Type	-
Purpose	Woodworking
PC connected	No
Product color	Black, Blue, Grey
Number of speeds	4
Lathe bed material	Steel
Rotational speed (max)	2600 RPM
Rotational speed (min)	890 RPM
Distance between centers	1000 mm
Motor power	400 W
AC input voltage	230 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	1375 mm
Width	250 mm
Height	410 mm
Weight	20000 g