www.scheppach.com
GB
|
21
Noise data
Sound power level L
WA
93,6 dB(A)
Sound pressure level L
pA
77,8 dB(A)
Uncertainty K
WA/pA
3 dB
8. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for transport
damage.
In case of complaints the dealer must be informed
immediately. Subsequent complaints will not be ac-
cepted.
If possible, store the packaging until the warranty pe-
riod has expired.
Read the operating manual to make yourself familiar
with the device prior to using it.
Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
Specify our part numbers as well as the type and year
of construction of the device in your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and suocation!
9. Attachment / Before starting the
equipment
9.1 Fitting the wheels (7) (accessories bag A)
• Insert the bolt through the wheel.
• Attach two washers.
• Now insert the bolt through the holes in the lower
•
•
• Repeat this process on the other side.
9.2 Fitting the table (5)
• Undo the star-grip screw (Fig. 4)
• Now fold out both side trays (11), as shown in Fig. 5
•
and re-tighten the star grip screws previously loos-
ened (Fig. 6 (2).
9.3 Fitting the complete control arms (10)
(accessories bag B)
•
• Grease the top and bottom plates.
• Insert the complete control arm in the position pro-
• Thrown pieces can lead to injury if the work piece
is not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• -
chine prior to any operations.
• Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
• Use the tools recommended in this manual to ob-
tain the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
7. Technical data
Motor
230 V∼ / 50 Hz
Input P1 3000 W
Output P2 2200 W
Operating mode S6 40%
Motor speed 2800 1/min
Dimensions D/W/H 845 x 935 x 1500 mm
Table height 800 mm
Working height 940 mm
Log length 550 mm
Power max. 8 t*
Piston stroke 550 mm
Forward speed 3,1 cm/s
Return speed 17,3 cm/s
Oil quantity 4 l
Weight 109,9 kg
Subject to technical changes!
* Operating mode S6 40% is an uninterrupted, peri-
odic mode. The mode comprises of a start-up period,
a time with constant load and an idle time. The oper-
ating time is 10 mins, the relative duty cycle is 40% of
the operating time.
Noise
m Warning:
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
To Next Page
Loading...
Need help?
General
