www.scheppach.com
GB
|
19
ing woodworking machines must also be observed.
occur due to a failure to observe this manual and the
2. Device description
1. Transport handles
2.
3.
4. Adjustable claws
5. Table
6. Oil dipstick
7.
8. Stroke setting bar
9. Control handle
10. Complete control arms
11.
12. Combination switch/plug
13.
14. Cover
3. Scope of delivery
A. Splitter
B. Control arms
C. Adjustable claws
D. Additional retainers
E.
F.
G. Operating manual
H.
4. Intended use
misuse. The user / operator and not the manufactur
caused as a result of this.
tions and the operating instructions to be found in
this manual.
All persons who use and service the equipment have
to be acquainted with this manual and must be in
formed about the equipment’s potential hazards.
work.
from such changes.
1. Introduction
Manufacturer:
Scheppach GmbH
Dear customer,
and success.
Note:
the product that occurs due to:
•
•
•
technicians,
•
parts,
•
•
VDE0113.
We recommend:
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord
ance with the recommendations.
The operating instructions contain important infor
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
manual each time before operating the machine and
were instructed concerning the operation of the ma
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
To Next Page
Loading...
Need help?
General
