www.scheppach.com
GB
|
15
Observe all safety instructions. If you disregard
the safety instructions, you endanger yourself and
others.
5. Technical data
Dimensions when folded
out in mm
1088 x 520-690 x
618-820
Dimensions when folded
in mm
1088 x 100 x 145
Max. payload in kg 600
Weight in kg 9.3
Subject to technical changes!
6. Unpacking
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for trans-
port damage. Immediately report any damage to the
transport company that delivered the Product. Later
claims will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the rst time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m ATTENTION!
The product and the packaging material are not
children’s toys! Do not let children play with plas-
tic bags, lms or small parts! There is a danger of
choking or suocating!
7. Layout
Fit the sawhorse as shown in Figure 1 - 7.
• Always ensure the sawhorse is secure when setting
it up.
• Always ensure that you assume a natural and safe
standing position when working.
• Do not overload the sawhorse! Do not use the saw-
horse for purposes for which it is not intended.
• Modications or unauthorised changes to the saw-
horse as well as the use of unapproved parts is for-
bidden.
• All parts of the sawhorse, in particular the safety de-
vices, must be correctly mounted in order to guaran-
tee trouble-free operation.
• Keep the sawhorse out of reach of children.
• Store the sawhorse in a location that is inaccessible
to unauthorised persons and children.
1. When lifting the sawhorse, appropriate lifting tech-
niques must be used to prevent injury.
2. Ensure that the work area is well lit during work.
3. Ensure that the sawhorse is placed on a at sur-
face that is clear, dry and free of debris.
4. Ensure that all 4 legs have rm contact with the
oor. If the sawhorse is not level and straight,
loads placed on it may fall and possibly cause
damage to the object loaded on it, resulting in se-
rious injury or death.
5. Ensure that the load placed on the sawhorse does
not exceed the applicable safe working load. Over-
loading may cause the sawhorse to fail, possibly
resulting in damage to the object loaded on it and
possibly serious injury or death.
6. Never stack sawhorses for additional height.
Caution:
Do not place a weight of more than 600 kg evenly dis-
tributed load* on the sawhorse.
Do not use the sawhorse as a scaold, standing plat-
form or stepladder.
*Evenly distributed load: The maximum evenly dis-
tributed load over the top rail of the sawhorse (for each
sawhorse separately).
This means the maximum weight that can be applied
to this sawhorse (as specied on the type plate and
operating instructions).
Evenly distributed load means when the total weight is
evenly distributed on the top rail. The amount of weight
that can be applied to 2 identical sawhorses is twice
this value.
To Next Page
Loading...
Need help?
General