SECOH Service & Maintenance Manual - 3 - 31.10.07
3. Filter element cleaning or replacement
a) Undo the truss head screw of the filter
cover.
b) Remove the filter cover, by firmly
pulling it off.
c) Remove the filter element and brush
off any dust particles by hand.
If heavily clogged with dust, wash in a
neutral detergent followed by a
thorough rinsing in water. Allow to dry
in the shade. Note: Do not use
benzene or thinner to clean filter
element as it can be damaged!
d) After cleaning reassemble the filter
element back in place. Make sure to
put the harder side of the filter facing
downwards. Press in the filter cover.
e) Secure the filter cover by the truss
head screw.
To Next Page
Loading...
Need help?
General
