Sega CD User Manual

TO CONNECT YOUR SYSTEM TO THE NEW GENESIS MODEL
Make sure your Genesis system is set up and operating properly before
connecting your Sega CD. (Please see your Sega Genesis Instruction
Manual for details.) Then follow these steps:
1. Unplug the Genesis from its AC adapter.
2. Locate the expansion
slot panel on the right side
of the Genesis. Remove the
panel by pressing in on its
bottom and taking the
panel off the console.
Remove the red plastic
cover from the expansion
slot connector.
Note: Look carefully at the
"piano" contacts on the
connector. Over time,
some tarnish or corrosion
may have accumulated. If
the contacts appear to be
tarnished, carefully clean

Sega CD Specifications

General

Brand	Sega
Model	CD
Category	Game Console
Language	English