3.Main Features
Main Features(Firmware Version: SD1.0.5) *This will be continuously updated
, power on/off through both 4G and BLE4.0.
Two modes to locate: Single/Continuous
Adjustable sensitivity of accelerometer
-defined communication interval between server and IoT
Headlight switch: manual or programmable
Enable/Disable Riding Modes Switch
Riding modes switch:manually or programmable
Enable/Disable Throttle, Cruise control
, Front&rear lights flash
-defined Max. Speed of different Riding Modes
Read and report scooter information remotely (speed, estimated battery life, Riding Modes. distance travelled and estimated r
ining mileage, temperatures
of scooter motor and mainboard, etc.)
IoT device dismantled alarm
Illegal scooter movements or shaking alarm
Scooter fallen down alert (report to server, no alarm)
Remote firmware upgrades of scooters and IoT devices
To Next Page
Need help?
General