Sharp 21HT-15C User Manual

15
ENGLISH
NOTE
1 2 3
4 5 6
7 8 9
0
LIST
MENU
?
XiS
I
TV/VIDEO
TV/TEXT REMOTE CONTROL
CH
CH
EXIT
SORT
<PR>
ON .
OFF .
EXIT
ON 8.3
OFF .
EXIT
Timer Setting
ON Timer
Automatically turns the power ON after the set time has passed.
1
Press
MENU
to call the MAIN menu
screen.
2
Press
CH
or
CH
to select
, and press
MENU
.
3
Press
CH
or
CH
to select
“
ON” mode.
4
Press or to set the time.
(from 10 min. to 12 hour 50 min.,
in 10 min. increments)
5
Press to set the TV into
Standby mode. The Power
indicator flashes red.
When the preset time (in the
above example, 8 hours and 30
minutes) has passed, the power
turns ON and a picture appears
on the screen.
• In order to know when the ON Timer programme has been run properly, when the TV is
in the standby mode, the ON Timer indicator remains flashing in red.
• As a safety precaution, in case nobody is at home when the television switches on
automatically, the television will disconnect itself automatically within 120 minutes ; any
button of the remote control functions should be pressed, if it is to remain ON.
• In the event of a power cut, disconnection from the plug, or the television is switched off
at the mains switch, all the data in the ON Timer will be cancelled.
• The TIMER settings will remain if you exit the TIMER setting screen after setup.

Sharp 21HT-15C Specifications

General

Brand	Sharp
Model	21HT-15C
Category	TV
Language	English