Sharp 32R-S50 User Manual

14
Audio Select
L MTS (MULTI CHANNEL TV SOUND)
This circuit allows reception of stereo or bilingual TV sound.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to “AUDIO
SELECT”.
3 Press VOL (+) or (–) to access AUDIO SELECT mode.
4 Press VOL (+) or (–) to select “STEREO”, “SAP” or “MONO”.
5 Press MENU to exit.
Ex: Actual screen indicating ON AIR when receiving STEREO broadcasts.
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to fixed monaural
mode.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo broadcast.
You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined
by the video source.
TI ER
SET UP
M
VIDEO ADJUST
SELECT
CAPT I ONCLOSED
AUD I O
PARENT CONTROL
ENERGY SAVE
(MAIN MENU screen)
→
(AUDIO SELECT mode)
SELECT
:STEREOMTS
AUD I O
(AUDIO SELECT mode)
MO O
S
SA
E
P
N
IR
12
REO
ON A
T IRON A
(Channel call on screen)
SELECT
:SAPMTS
AUD I O
STEREO SAP MONO
12-14 32/36R-S50.p65e 19/1/01, 5:14 PM14

Sharp 32R-S50 Specifications

General

Brand	Sharp
Model	32R-S50
Category	CRT TV
Language	English