3
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
Accessories
Remote Control Battery Installation
Remote control
Size-AA Dry Battery
Operation Manual
Loop Aerial
Congratulations! You are now the proud owner of a SHARP Colour Television Receiver. To ensure proper
operation, please read this manual carefully. After reading, keep this manual in a safe place for future
reference.
Contents
General Information
Terms of guarantee ............ 1
Safety Precaution ................2
Accessories ........................ 3
Battery Installation.............. 3
Installing your TV
Aerial Connections ............ 4
Typical connections ............4
Location of controls ............5
Channel Setting
Auto Tuning ........................ 6
Manual Tuning......................7
Fine Tuning ..........................9
Skipping programmes ......10
Cancelling Skip..................11
Basic Operation
Watching a TV programme 12
Power, Standby & volume
buttons ..............................12
Useful Features
Picture Adjustment .......... 13
Timer Setting .................... 14
Child Lock ........................ 16
Other Functions
Flash back & Sound Mute 18
TV/VIDEO & Call buttons.. 19
Teletext ..............................20
Reference
Troubleshooting .............. 23
Calling for service ............ 24
Specifications ....................24
Before using the TV set for the first time, install the supplied dry batteries in the remote control.
• Remove batteries if weak or if the unit is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.
NOTE
1 With your thumb nail, pull
up the slit as indicated by
the arrow to remove the
battery cover.
2 Insert two batteries 1,5 V
(size «AA»). Be sure to
match the battery A/D ter-
minals with the A/D marks
inside the compartment.
3 Replace the battery cover.
Dear SHARP Customers
To Next Page
Loading...
Need help?
General
