TO CHANGE TEMPERATURE
TO ADJUST FAN SPEEDS:
TO USE AUTO COOL FEATURE:
YOU WILL SEE :
YOU WILL SEE:
SETTING:
YOU WILL SEE:
Note:
Tap or hold either up ( ) or down ( ) button until the desired temperature is seen on the display. This temperature will be automati-
Note:
Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates, For example if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly,such as a door being opened, it will automatically go
to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.
cally maintained anywhere between 60
o
F (16
o
C) and 90
o
F (32
o
C) for cooling mode. If you want the display to read the actual room temperature.
Press the Fan Faster button will increase the fan speed from Low (LO), to Medium (ME), to High (HI). The digital display will indicate
your chosen speed. Press the Fan Slower button will decrease the fan speed from High (HI), to Medium (ME), to Low (LO).The digital display will
indicate your chosen speed.After 5 seconds the display will revert back to the set temperature.
See "To Operate on Fan " section on Page 13.
▲
▲
LIGHT On
DO THIS:
PRESS TO
PRESS TO
RAISE
LOWER
DO THIS:
PRESS
FASTER
TO SELECT:
SLOWER
DO THIS:
PRESS
AUTO COOL
To Next Page
Loading...
Need help?
General
