6
BEFORE OPERATING
Getting Started
Clock Setting
* To enter the present time of day 11:34 (AM or PM).
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45), Err will appear in the display.
Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long as your
fi nger is pressing the TIMER/CLOCK pad, the time of day will be displayed.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Stop/Clear
Step Procedure Pad Order Display
1
Ensure the oven door is closed.
Plug the oven into a power point and switch
on the power.
Flashing eights
2
Press the STOP/CLEAR pad so that the
oven beeps.
Only the dots will remain.
Step Procedure Pad Order Display
1
Press the TIMER/CLOCK pad.
The dots (:) will fl ash on and off.
2
Enter the correct time of day by pressing the
numbers in sequence.
3
Press the TIMER/CLOCK pad again.
R-290N(S) [01-15].indd 6R-290N(S) [01-15].indd 6 1/19/09 4:03:04 PM1/19/09 4:03:04 PM
To Next Page
Loading...
Need help?
General
