5
OPERATION OF CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control
panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when cooking
procedure is required.
Control Panel Display
1 Digital Display
2 Indicators
The appropriate indicator will flash or light up, just
above each symbol according to the instruction.
When an indicator is flashing, press the suitable button
or do the necessary operation.
Microwave power level
Cooking in progress
Defrost
Weight
Quantity
Stir or Turn over
3 EASY DEFROST button
Press to select one of the 5 automatic programmes.
4 INSTANT ACTION button
Press to select one of the 3 automatic programmes.
5 EASY COOK (Easy Cook1 & Easy Cook2) buttons
Press to select one of the 4 automatic programmes.
6 STOP button
7 START/+1min button
8 MICROWAVE POWER LEVEL button
9 TIMER/WEIGHT knob
1
2
3
4
6
8
5
7
9
R-291Z(ST) [01-14].indd 5R-291Z(ST) [01-14].indd 5 7/2/12 10:08:44 AM7/2/12 10:08:44 AM
To Next Page
Need help?
General
