5
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when a
cooking procedure is required.
Touch Control Panel Layout
Control Panel Display
10. TIMER/CLOCK PAD
Press to set Timer and Clock.
11. STOP/CLEAR PAD
Press to clear during programming.
Press once to stop operation of oven
during cooking; press twice to can-
cel cooking programme.
12. INSTANT COOK/START PAD
Press once to cook for 1 minute on
100% or increase by 1 minute mul-
tiples each time this pad is pressed
during manual cooking. Press to
start oven after setting programmes.
6. QUICK AND EASY PAD
Press to select Quick and Easy
menus.
7. MORE, LESS PADS
Press to increase/decrease the time
in one minute increments during
cooking or to alter the cooking result
for the automatic operations.
8. NUMBER PADS
Press to enter cooking times, clock
time, weight or quantity of food.
9. POWER LEVEL PAD
Press to select microwave power
setting. If power is not selected, it
automatically defaults to 100%.
1. HEALTHY MENUS PADS
Press to select "Healthy Menus"
menu.
2. EXPRESS MENUS PADS
Press to select "Express Menus"
menus.
3. SENSOR COOK PADS
Press to select Sensor Cook menus.
4. EASY DEFROST PAD
Press to defrost frozen food by en-
tering quantity.
5. SENSOR REHEAT PAD
Press to select a reheat menu.
Indicator
1
2
3
4 5
6
7
8
9 10
11 12
SCA/SCNZ R398N(S),P05- 8/7/08, 2:00 PM5
To Next Page
Loading...
Need help?
General
