26
NETWORK CONFIGURATION
The Network connection is only intended to access Pay TV services from your Freeview/Saorview
broadcaster. Please note, the TV cannot be used for internet access.
For the network confi guration to work the TV will need to be connected to your home network via an
ethernet cable, with these requirements in place the TV will connect to the network automatically.
IP Confi g - Allows you to access LAN network connection settings. choose from the following options:
Auto Will automatically connect the TV to your home network(this is the default setting
and is highly recommended)
Manual Allows you to manually change the IP, Netmask, Gateway and DNS information.
Network Info - Allows you to view Information about network settings
Network Test - Allows you to test the network connection.
Network Confi guration
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
User Guide - SHA-MAN-0084 - Sharp - LC CHE, DHE, CFE , 32,40,43,49and50 inch models.indd Sec1:26User Guide - SHA-MAN-0084 - Sharp - LC CHE, DHE, CFE , 32,40,43,49and50 inch models.indd Sec1:26 03/02/2016 11:19:3303/02/2016 11:19:33
To Next Page
Loading...
Need help?
General