Sharp LC-40CFE6241K User Manual

20
TV Menu Operation
CHANNEL MENU
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded List - Shows a list of recorded TV programmes.
Schedule List - Lists your programme reminders.
OAD (Software Update) - Switch on/off OAD (over air download) software updates.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, move, skip and select favourite channels.
Important: To receive Freeview/Saorview channels, in particular HD
channels, you will need a Digital TV aerial and be in a good Freeview/
Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will
be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels
are only available in the ROI.
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:20User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:20 20/08/2015 14:04:0420/08/2015 14:04:04

Sharp LC-40CFE6241K Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	40 \
Display brightness	280 cd/m²
Native aspect ratio	16:9
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	1000000:1
Display diagonal (metric)	100 cm
Motion interpolation technology	Active Motion 400
3D	No
Supported file systems	FAT16, FAT32, NTFS
Annual energy consumption	66 kWh
Tuner type	Analog & digital
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-C, DVB-T, DVB-T2
Video apps	YouTube
Lifestyle apps	Facebook, Twitter
Audio decoders	DTS, Dolby Digital, DTS TruSurround
RMS rated power	8 W
Number of speakers	2
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Consumer Electronics Control (CEC)	Aquos Net+
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Teletext function	-
Audio formats supported	AAC, AC3, EAC3, M4A, MP3, WMA
Image formats supported	BMP, JPEG XR, JPG, PNG
Video formats supported	ASF, AVI, FLV, M2TS, M4V, MKV, MP4, MPG, RM, RMVB, SWF, TS, VOB, WMV
Product color	Black
Panel mounting interface	400 x 200 mm
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	80 W
Power consumption (standby)	0.5 W
Power consumption (typical)	65 W

Weight and Dimensions

Depth (with stand)	202 mm
Width (with stand)	961.8 mm
Height (with stand)	569.1 mm
Weight (with stand)	7600 g
Depth (without stand)	67.1 mm
Width (without stand)	916.8 mm
Height (without stand)	532.9 mm
Weight (without stand)	7300 g