Sharp LC-40CFE6242E User Manual

EN
View the next day by pressing BLUE. [INFO] shows detailed
information about the selected post
3. Press
[EXIT] to exit the 7 day TV Guide.
* - only for models with recording function

USB Record - Digital mode*
Built into this television is aUSB record facility. This function is available in
Digital mode when used in conjunction with acompatible USB memory
stick or USB Hard drive. The bene ts of this are as follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV).
• One button record, if you decide you want to record the current
programme.
• Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use ahigh speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Speci cation - USB Memory Stick
 Read Speed - 20 MB/s(Mega Byte Per Second)
 Write Speed - 6 MB/s(Mega Byte Per Second)
Pause Live TV (Time Shift) *
Pausing Live TV is very simple.
 Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
 Press fast forward to go forward in arecording (i.e. to skip adverts).
 Press fast rewind to go back in arecording
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
* - only for devices with built in PVR function

Sharp LC-40CFE6242E Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	40 \
Display brightness	280 cd/m²
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Edge-LED
Supported video modes	1080p
Display diagonal (metric)	100 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	Active Motion 400
3D	No
Supported file systems	FAT16, FAT32, NTFS
Annual energy consumption	66 kWh
Audio decoders	DTS 2.0, DTS TruSurround, Dolby Digital DTS, Dolby Digital Plus
RMS rated power	16 W
Number of speakers	2
Tuner type	Analog & digital
Analog signal format system	PAL, SECAM
Digital signal format system	DVB-C, DVB-S2, DVB-T, DVB-T2, ISDB-S
HDMI ports quantity	3
DVI-D ports quantity	0
Common interface (CI)	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Audio formats supported	AAC, AC3, EAC3, M4A, MP3, OGG, WMA
Image formats supported	BMP, JPG, PNG
Video formats supported	ASF, AVI, FLV, M2TS, M4V, MKV, MP4, MPG, RM, RMVB, SWF, VOB, WMV
Product color	Black
Panel mounting interface	200 x 100 mm
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	80 W
Power consumption (standby)	0.5 W
Power consumption (typical)	65 W
Power consumption (PowerSave)	45 W

Weight and Dimensions

Depth (with stand)	202 mm
Height (with stand)	569.1 mm
Weight (with stand)	7600 g
Depth (without stand)	67.1 mm
Width (without stand)	916.8 mm
Height (without stand)	532.9 mm
Weight (without stand)	7300 g