LC-32LE265T / LC-40LE265T
3 – 21
3.MAXIMUM VOLUME
4.VOLUME FIXED
Default
AC CTRL : The unit stars at the volume ƐƉĞĐŝĮĞĚ in the volume ĮdžĞĚ level,when power is
AC/RC CTRL : The unit starts at the volume ƐƉĞĐŝĮĞĚ in the volume ĮdžĞĚ level ,when power is
( AC JON,remote control JON,main unit's Key JON )
In "Variable" ƐĞƫŶŐ ,the ƐŽƵŶĚ volume ŚĂĚ been ĐŽŶǀĞŶƟŽŶĂůůLJ set at 1 but this ŽƉĞƌĂƟŽŶ has been
ĂďŽůŝƐŚĞĚ ;ĂŶĚ follow the last memory ).
The ƐŽƵŶĚ volume form the ON-ƟŵĞ is not set at 1 either ĂŶĚ the ƐŽƵŶĚ volume set value of the
ON-ƟŵĞƌ before the hotel ŵŽĚĞ is ĞdžĞĐƵƚĞĚ .
^ĞƫŶŐ is ǀĂůŝĚ only for the speakers of the unit.(As for the ŚĞĂĚƉŚŽŶĞƚŚĞ ƐŽƵŶĚ volume can be set up to 60
ŝƌƌĞƐƉĞĐƟǀĞ of the limit. )
In line output ;ƐŽƵŶĚ volume variable ),the ƐŽƵŶĚ volume can be ĂĚũƵƐƚĞĚ from -60 to 0 ŝƌƌĞƐƉĞĐƟǀĞ of
pre-ĂĚũƵƐƚĞĚ value.
As for ƐŽƵŶĚ volume ĮdžŝŶŐ ĂŶĚ ƐŽƵŶĚ volume MAX level,the ƐŽƵŶĚ volume ĮdžŝŶŐ has priority.
Once the ƐŽƵŶĚ volume has been ĐŚĂŶŐĞĚ by ĂĚũƵƐƚŵĞŶƚ process or ŚĞĂĚƉŚŽŶĞŝƚ shoul be set back to the ƐŽƵŶĚ
volume preset by ƐŽƵŶĚ volume ĮdžŝŶŐ level when the ĂĚũƵƐƚŵĞŶƚ process
ĞŶĚƐ or when the ŚĞĂĚƉŚŽŶĞ is ƌĞŵŽǀĞĚ
5.VOLUME FIXED LEVEL
6.R/C BUTTON
Limit in ƐĞƫŶŐ
džĐĞƉƟŽŶ
In the item "VOLUME" of ĂĚũƵƐƚŵĞŶƚ process ,the ƐŽƵŶĚ volume can be set freely ŝƌƌĞƐƉĞĐƟǀĞ of this ƐĞƫŶŐ .
When the ƐŽƵŶĚ volume is set lower than 99,only ĮŐƵƌĞƐ are ĚŝƐƉůĂLJĞĚ ĂŶĚ the ƐŽƵŶĚ volume bar is not ĚŝƐƉůĂLJĞĚ
The ŵĂdžŝŵƵŵ ƐŽƵŶĚ volume for ON-ƟŵĞƌ (WAKE UP TIMER)is ůŝŵŝƚĞĚ also to the preset value.
^ĞůĞĐƟŽŶ
Default
džƉůĂŶĂƟŽŶ
^ŽƵŶĚ volume not be ĂĚũƵƐƚĞĚ ŚŝŐŚĞƌ than the preset value.
100
ĚũƵƐƚŵĞŶƚ from 1 to 100 (no loop )
FIXED : The volume is ĮdžĞĚ to the value ĂĚũƵƐƚĞĚ in the volume ĮdžĞĚ level .
ƚƵƌŶĞĚ on in the case of the AC-ON only.
ƚƵƌŶĞĚ on any case .
džƉůĂŶĂƟŽŶ
Remark
^ĞƫŶŐ is ǀĂůŝĚ only for the speakers of the unit .(As for the ŚĞĂĚƉŚŽŶĞƚŚĞ ƐŽƵŶĚ volume can be set up to 100
ŝƌƌĞƐƉĞĐƟǀĞ of the limit.)
In line output ;ƐŽƵŶĚ volume variable ),the ƐŽƵŶĚ volume can be ĂĚũƵƐƚĞĚ from-100 to 0 ŝƌƌĞƐƉĞĐƟǀĞ of pre-ĂĚũƵƐƚĞĚ
value.
When
the ƐŽƵŶĚ volume is set ŚŝŐŚĞƌ than the MAX ƐĞƫŶŐ by the ĂĚũƵƐƟŶŐ process or ŚĞĂĚƉŚŽŶĞ ,the ƐŽƵŶĚ volume control
ŽƉĞƌĂƟŽŶ is ƉƌŽŚŝďŝƚĞĚ for turn-up ĂŶĚ the ƐŽƵŶĚ volume ƐŚŽƵůĚ be ƚƵƌŶĞĚ ĚŽǁŶ to MAX in this state.
KƉƟŽŶ
"VARIABLE","FIXED","AC CTRL "or "AC/RC CTRL " (loop ĞŶĂďůĞĚͿ
"VARIABLE"
VARIABLE : The volume is not ĮdžĞĚ .
džƉůĂŶĂƟŽŶ The ƐŽƵŶĚ volume to be ĮdžĞĚ by "volume ĮdžĞĚ "is ĚĞƚĞƌŵŝŶĞĚ
Limit in ƐĞƫŶŐ
The ƐŽƵŶĚ volume for the ON-ƟŵĞƌ (wake up ƟŵĞƌͿ is ĮdžĞĚ also without ĚŝƐƉůĂLJ of ŵĞŶƵĞƐŝĚĞƐƚŚĞ ƐĞƫŶŐ is ŵĂĚĞ
impossible .(Basically ,the manu is not ĚŝƐƉůĂLJĞĚͿ
The ĨŽůůŽǁŝŶŐ keys become ŝŶǀĂůŝĚ
1) ^ŽƵŶĚ volume Up/Down(Vol +/- )( for both remote control ĂŶĚ the unit )
2)Mute ( MUTE )
In the item "VOLUME"af ĂĚũƵƐƚŵĞŶƚ process ,the ƐŽƵŶĚ volume can be set freely ŝƌƌĞƐƉĞĐƟǀĞ ot the ƐĞƫŶŐ
džĐĞƉƟŽŶ
Remark
^ĞůĞĐƟŽŶ
ĚũƵƐƚŵĞŶƚ from 1 to 100 (no loop )
Default
30
Limit in ƐĞƫŶŐ
None
džĐĞƉƟŽŶ
None
Remarks
^ĞƫŶŐ is ǀĂůŝĚ only when "Volume ĮdžĞĚ "is ƐĞůĞĐƚĞĚ for ΗĮdžĞĚΗ
This must be ĐŽŶĮƌŵĞĚ actually by ĐŚĂŶŐŝŶŐ also the ƐŽƵŶĚ volume in ĂĐĐŽƌĚĂŶĐĞ with ƐĞƫŶŐ
^ĞůĞĐƟŽŶ
^ĞůĞĐƟŽŶ between ΗZĞƐƉŽŶĚΗΗEŽ ƌĞƐƉŽŶĚ ΗĂŶĚ Η>ŝŵŝƚĞĚΗ (loop ƉƌŽǀŝĚĞͿ
ĚnopseRtluafeD
džƉůĂŶĂƟŽŶ
The ŽƉĞƌĂƟŽŶ of the remote control's Keys is set.
ZĞƐƉŽŶĚ :The remote control's Keys in the normal state are ĞŶĂďůĞĚ
No ƌĞƐƉŽŶĚ
:The remote control's Keys in the normal state are ĚŝƐĂďůĞĚ
The POWER Key ( RECEPTIONS /STANDBY Key ) is also ĚŝƐĂďůĞĚ
>ŝŵŝƚĞĚ :Only a part of Keys (CHANNEL,etc)is ĞŶĂďůĞĚ ĂŶĚ other keys are ĚŝƐĂďůĞĚ
Limit in ƐĞƫŶŐ 1) In ΗůŝŵŝƚĞĚΗ ƐĞƫŶŐŽŶůLJ power KEK&&ƐŽƵŶĚ volume Ÿ źƚƵŶŝŶŐ Ÿ ź ĂŶĚ BACKLIGHT ;ďƌŝŐŚƚŶĞƐƐ sensor )are
ĂĐĐĞƉƚĞĚ .
2) In "No ƌĞƐƉŽŶĚΗƐĞƫŶŐĂůů the keys ;ŝŶĐůƵĚŝŶŐ the power key )are not ĂĐĐĞƉƚĞĚ
ĚũƵƐƚŵĞŶƚ process,factory ƐĞƫŶŐŝŶƐƉĞĐƟŽŶ process ĂŶĚ hotel only keys are ǀĂůŝĚ ŝƌƌĞƐƉĞĐƟǀĞ of ƐĞƫŶŐ
All the keys can be ƵƐĞĚ in ĂĚũƵƐƚŵĞŶƚ ƉƌŽĐĞƐƐŝŶƐƉĞĐƟŽŶ ŵŽĚĞ ĂŶĚ hotel menu ŝƌƌĞƐƉĞĐƟǀĞ of ƐĞƫŶŐ
džĐĞƉƟŽŶ
Remarks
To Next Page
Loading...
Need help?
General