6
BEFORE OPERATING
Only the dots will remain.
Press the STOP/CLEAR pad so that the
oven beeps.
Getting Started
Step
Procedure Pad Order Display
Ensure the oven door is closed.
Plug the oven into a power point and switch
on the power.
Flashing eights
Clock Setting
* To enter the present time of day 11:34 (AM or PM).
Step
Procedure Pad Order Display
Press the TIMER/CLOCK pad.
Enter the correct time of day by pressing
the numbers in sequence.
2
3
Press the TIMER/CLOCK pad again.
The dots (:) will flash on and
off.
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),
will appear in
the display.
Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Stop/Clear
1
2
1
STOP
CLEAR
TIMER
CLOCK
TIMER
CLOCK
To Next Page
Loading...
Need help?
General
